Devices, transmitter modules and software to build your Smart Network
Taggle Sensors and Communication Modules
Many of our devices and transmitters can be paired with other technology to create a seamless Smart Network and Community.
Taggle Byron Development Module
The Corella hardware development module from Taggle provides engineers, scientists, researchers and students a development and research module that provides an easy way to get started with Taggle’s Byron IoT wireless communications technology.
Utilising the 922MHz LIPD band, this module provides low power, one-way, long-range radio communications for telemetry and IoT sensor applications.
This module is designed for use with Arduino, Raspberry Pi and similar devices, using a compatible shield in an XBee Pro format.
Data from the host is sent to the module by using simple AT commands and collected by Taggle’s network of receivers. Data is then delivered via the Taggle web portal and a variety of configurable open-standard interfaces including MQTT, Hypercat, HTTPS/REST and more.
A low-cost, low-power transmitter designed specifically for use with Elster’s V100 water meter, which is used in the majority of domestic dwellings in Australia.
The MRC-1 is easily retrofitted onto V100 meters in the field; and has a 10+ year design life that exceeds the typical life of the meter itself.
Communicating with Taggle receivers, data can be collected over a wide geographical area.
The MRC-1 is fitted with a Hall Effect sensor that out-performs the more widely used T-Probe or reed switch sensors, defeating the jitter sometimes experienced with reed switches.
Designed primarily for Automatic Meter Reading (AMR) applications.
Taggle’s ADC-1 pulse-count AMR module is designed to suit all other pulse-output style meters.
Sealed and maintenance free, the ADC-1 also has a 10+ year battery, the ADC-1 is one of Taggle’s most widely used products for pulse count applications such as water, gas and electricity meters.
The ADC-1 also monitors consumption continuously and transmits this to the network on an hourly basis, or more frequently if required.
The ADC-1 is an extremely versatile device and has been used in a variety of water and environmental sector situations.
High Power AMR Module
Taggle’s HP-1 high-power AMR module is designed for those difficult radio environments such as pits and basements.
Using a higher-power transmitter, the HP-1 has been tested and certified for Australian and US regulations.
Utilising a larger battery, the HP-1 still retains the long-life maintenance-free profile of the ADC-1 and MRC-1.
For Industrial Sensors
The Taggle LSTT is a general purpose telemetry module supporting most common industrial sensors, such as pressure, flow, level, volume, weather and environmental sensing and more.
Taggle “Parakeet” is part of Taggle’s next generation tag platforms which provide a wide range of new sensor applications.
Parakeet provides and unrivalled 20-year battery life in automatic meter reading applications.
Parakeet includes AES encryption for enhanced security and NFC support for faster installation and configuration.
External Power Pack
Taggle’s external power pack pairs with the LSTT module to provide extended battery life for higher powered applications and/or frequent data transmissions.
For more information on software solutions provided by Taggle please visit www.miwater.com
Integrated Meter Data Management Solution
MiWater is an integrated solution to manage and analyse water supply & consumption and related activities across the entirety of a water utility’s network. MiWater processes, interprets and integrates data received from Automated Metering Infrastructure (AMI) and other sources to provide water utilities control and oversight over their network infrastructure, from the whole of network perspective down to an individual domestic service.
The MiWater solution has been designed by water industry professionals and developed over a period of time in response to the challenge of managing the large quantity of data that was being generated through AMI.
Customer & Community Portal
MyH20 is a customer and community online service offering customers the tools to save water and money. With the ability to track their own daily water usage and keep an eye on how much it’s costing. Customers can also choose their own water consumption targets and set up alerts to be warned, if these targets have been or are likely to be exceeded.
Customers can add any of their properties to their MyH20 profile and give others, including tenants and real estate agents, access to view water usage information.
Sewer Data Management Solution
MySewer is a management tool for monitoring the sewer system within your network. With alerts warning of high levels and overflows, you are quickly notified if there are any problems that need to be addressed.
With data and analytics you can learn the relationships between rainfall and sewer overflow events, enabling for infrastructure planning and development.
Taggle Certified Partners Technology
Taggle technology enables other companies’ IoT devices to leverage Taggle’s low-power, long-range technology for data communication.
Taggle’s Byron wireless system allows others to incorporate our technology within their own devices; alternatively they simply connect Taggle transmitter modules on their existing devices.
Honeywell V200HT. Taggle Byron-enabled Smart Meter
The high accuracy and extended flow range of the V200 range is combined with the latest advances in intelligent metering capabilities.
The integrated Taggle ByronTM Wireless radio communication delivers multiple open data standards, for interoperability.
Vaisala Air Quality Transmitter AQT410
The AQT410 is a cost-effective, air quality and meteorological data sensor solution, which measures up to four most common gaseous pollutants, such as nitrogen dioxide (NO2), sulphur dioxide (SO2), carbon monoxide (CO) and ozone (O3).
Advanced algorithms compensate for the impact of ambient conditions and ageing on the sensor elements, thus removing the need for costly gas sampling and maintenance equipment.
Vaisala Weather Transmitter WXT530
A compact all-in-one weather instrument providing six of the most important weather parameters: air pressure, temperature, humidity, rainfall, wind speed and wind direction.
Evoqua Chloroclam Water Quality Sensors
The Chloroclam Water Quality Monitor is a battery powered purpose-built system, monitoring water quality parameters within the potable water distribution system.
The sensor is designed to monitor turbidity, conductivity, pressure and chlorine.
It can be used for targeted water monitoring, within identified problem areas, or more ideally can be located throughout the distribution network to provide a comprehensive view of water quality.
HyQuest TB4 Tipping Bucket Rain Gauge
The HyQuest Solutions TB4 Model Tipping Bucket Rain Gauge is recognised as the world standard for measuring rainfall and precipitation, in remote and unattended locations.
The integrated syphon mechanism delivers high levels of accuracy, across a broad range of rainfall intensities.
Pulsar dBi HART Transducer Series – Level Sensor
Self contained non-contacting ultrasonic level sensor, measuring with digital echo processing; it gives superb performance for solids or liquids, particularly suitable for water level monitoring.
Acrulog™ H2S Monitor
The Acrulog™ H2S Parts Per Billions Monitor (PPB) is a portable gas data-logger, designed for indoor and outdoor environmental applications, to record low levels (0-2000PPB) of Hydrogen Sulphide (H2S), at sampling intervals of between 10 minutes and 1 hour. This Model Features built-in sample pump and optional 4-20mA industrial output.
The Acrulog™ H2S Parts Per Billions Monitor (PPB) logs and provides data to ensure that offensive and nuisance odour emissions are within acceptable environmental levels.
Level Sensor with LSTT Transmitter
Pressure-based levels sensor is ideal for monitoring water levels in tanks and bores.
Providing a 4-20mA analog output this sensor is paired with a Taggle LSTT module, to power and read the sensor.
Davis Metric Rain Collector
The Davis Metric Rain Collector is a tipping bucket rain gauge.
The body and base of the Davis rain gauge is constructed of tough, UV resistant plastic. The tipping bucket pivots on bearings that minimize friction and wear. Stainless steel adjustment screws under each chamber of the tipping bucket allow you to fine-tune the calibration.
Mounting holes are predrilled in the base and a built-in leveling trough aids in installation.
Hach FLO-DAR AV Sensor
Using advanced digital Doppler radar velocity sensing technology, along with ultrasonic level-sensing, the FLO-DAR sensor revolutionizes open channel flow monitoring, by measuring from above.
This means it can more effectively provide highly accurate flow data, under a wide range of challenging flow and site conditions, including sensor disturbances, high solids content, high temperature, shallow and caustic flows, large man-made channels, and high velocities of up to 20 ft/s.
Krohne Waterflux 3070
The WATERFLUX 3070 is a battery powered electromagnetic water meter for use in water abstraction wells, district metering areas and custody transfer measurement of potable water.
With optional pressure and temperature sensors, the meter can also be used for leak detection, quality control and pressure management systems.
Its measuring tube with a rectangular and reduced cross-section enables a stable measurement even at low flow rates.
ABB AquaMaster 3 Electromagnetic Flowmeter
AquaMaster 3TM is a range of high performance electromagnetic flowmeters for the measurement of electrically-conductive fluids and is normally supplied as factory-configured, calibrated system.
The AquaMaster 3 MODBUS interface has been designed for low power consumption, so that it can be used with battery or renewable energy supplies.
Siemens Sitrans P200 Pressure Sensor
The Siemens Sitrans Fixed Range Pressure Transmitter range was developed to measure the gauge and absolute pressure of liquids, gases and vapours across a variety of applications.
Taggle Sewer Overflow Sensor
The Sewer Overflow Sensor consists of two float switches integrated with a battery-powered Taggle transmitter, mounted in an IP68 rated enclosure for easy, in-chamber installation.
Its float switches, mounted at different levels within the chamber, are activated as the level in the chamber rises.
We are continuously developing our sensor range and finding new partners to achieve solutions, so why not get in touch to discuss your requirements?